Thermal performance enhancement of shell and helical coil heat exchanger using MWCNTs/water nanofluid

Journal of Thermal Analysis and Calorimetry - Heat exchangers serve as pivotal components in industries. Enhancement in the performance of heat exchangers has been the focus of researchers in the...     

Photocatalytic Reductive Radical-Polar Crossover for a Base-Free Corey–Seebach Reaction

A metal-free generation of carbanion nucleophiles is of prime importance in organic synthesis. Herein we report a photocatalytic approach to the Corey–Seebach reaction. The presented method operates under mild redox-neutral and base-free conditions giving the desired product with high functional group tolerance. The reaction is enabled by the combination of photo- and hydrogen atom transfer (HAT) catalysis. This catalytic merger allows a C−H to carbanion activation by the abstraction of a hydrogen atom followed by radical reduction. The generated nucleophilic intermediate is then capable of adding to carbonyl electrophiles. The obtained dithiane can be easily converted to the valuable α-hydroxy carbonyl in a subsequent step. The proposed reaction mechanism is supported by emission quenching, radical–radical homocoupling and deuterium labeling studies as well as by calculated redox-potentials and bond strengths.     

Synthesis of isoniazid-1,2,3-triazole conjugates: Antitubercular,antimicrobial evaluation and molecular docking study

In the present study, a series of new isoniazid-1,2,3-triazole conjugates ( 5a-k ) was synthesized via click chemistry approach. The newly synthesized compounds were assessed for their in vitro antitubercular and antimicrobial activities. The compound 5g has displayed potent antitubercular activity against Mycobacterium tuberculosis H37Rv (Mtb) with MIC value 1.56 μg/mL. The active compounds were screened for their cytotoxicity profile by MTT assay against RAW 264.7 cell line. The four compounds have shown good in vitro antimicrobial activities against both antibacterial and antifungal pathogens. A molecular docking study was accomplished to identify the probable mode of action of synthesized derivatives. These compounds have shown excellent binding affinity toward Enoyl-acp reductase (INHA) and DNA gyrase.     

Effects of Essential Oils of Elettaria cardamomum Grown in India and Guatemala on Gram-Negative Bacteria and Gastrointestinal Disorders

The present study examined the chemical composition and antimicrobial and gastrointestinal activity of the essential oils of Elettaria cardamomum (L.) Maton harvested in India (EC-I) and Guatemala (EC-G). Monoterpenes were present in higher concentration in EC-I (83.24%) than in EC-G (73.03%), whereas sesquiterpenes were present in a higher concentration in EC-G (18.35%) than in EC-I (9.27%). Minimum inhibitory concentrations (MICs) of 0.5 and 0.25 mg/mL were demonstrated against Pseudomonas aeruginosa in EC-G and EC-I, respectively, whereas MICs of 1 and 0.5 mg/mL were demonstrated against Escherichia coli in EC-G and EC-I, respectively. The treatment with control had the highest kill-time potential, whereas the treatment with oils had shorter kill-time. EC-I was observed to be more potent in the castor oil-induced diarrhea model than EC-G. At 100 and 200 mg/kg, P.O., EC-I exhibited 40% and 80% protection, respectively, and EC-G exhibited 20% and 60% protection, respectively, in mice, whereas loperamide (10 mg/kg, i.p., positive control) exhibited 100% protection. In the in vitro experiments, EC-I inhibited both carbachol (CCh, 1 µM) and high K⁺ (80 mM)-induced contractions at significantly lower concentrations than EC-G. Thus, EC-I significantly inhibited P. aeruginosa and E. coli and exhibited more potent antidiarrheal and antispasmodic effects than EC-G.     

Catalytic Conversion of Xylose to Furfural by p-Toluenesulfonic Acid (pTSA) and Chlorides: Process Optimization and Kinetic Modeling

Furfural is one of the most promising precursor chemicals with an extended range of downstream derivatives. In this work, conversion of xylose to produce furfural was performed by employing p-toluenesulfonic acid (pTSA) as a catalyst in DMSO medium at moderate temperature and atmospheric pressure. The production process was optimized based on kinetic modeling of xylose conversion to furfural alongwith simultaneous formation of humin from xylose and furfural. The synergetic effects of organic acids and Lewis acids were investigated. Results showed that the catalyst pTSA-CrCl₃·6H₂O was a promising combined catalyst due to the high furfural yield (53.10%) at a moderate temperature of 120 °C. Observed kinetic modeling illustrated that the condensation of furfural in the DMSO solvent medium actually could be neglected. The established model was found to be satisfactory and could be well applied for process simulation and optimization with adequate accuracy. The estimated values of activation energies for xylose dehydration, condensation of xylose, and furfural to humin were 81.80, 66.50, and 93.02 kJ/mol, respectively.     

Microstructural evolution and intermetallic formation in Zn-Mg hybrids processed by High-Pressure Torsion

High-pressure torsion (HPT) was used to investigate the synthesis of Zn-Mg hybrids by direct bonding of separate disks of Zn and Mg at room temperature under an applied pressure of 6.0?GPa after 1, 5, 15 and 30 turns. Microstructural characterisation of the HPT-processed disks showed the formation of a sub-micron multilayered structure embedded in a Zn-rich matrix with an average grain size of ～ 600?nm at the disk periphery after 30 turns. XRD and TEM analysis revealed the presence of MgZn₂ and Mg₂Zn₁₁ intermetallic compounds, which increased in volume fractions with increasing number of turns. The formation of these intermetallics, together with Hall-Petch strengthening, led to an exceptional increase of the hardness values after 15 turns. Electrochemical testing in simulated body fluid showed that the degree of plastic deformation had an impact on the corrosion resistance of the Zn-Mg hybrids, which would affect their implementation in the biomedical field for absorbable applications. This study confirmed that there is significant potential for using HPT in the joining of dissimilar metals at room temperature to form Zn-Mg hybrids containing ultrafine-grained metal-matrix heterostructures with enhanced hardness.     

Decrease in the Particle Size and Coercivity of Self‐Assembled CoNi Nanoparticles Synthesized Under a Repulsive Magnetic Field

Towards the challenge for synthesis of smaller‐sized heterostructures and hybrid composites for nanomagnets and magnetic fluid applications. Here, a novel method is reported to reduce the particle size of Cobalt–Nickel (CoNi) magnetic nanoparticles by placing them between a static, repulsive magnetic field (N–N/S–S) during synthesis in contrast to the conventional method of applying an attractive (N–S) magnetic field. The obtained smaller sized‐CoNi nanoparticles (≈40 nm) possess a uniform size, an excellent monodispersity, and outstanding magnetic properties. The results clearly demonstrate that the size and morphology change of CoNi nanoparticles have great influence on their magnetic properties. This study provides a footprint to design new heterostructured magnetic nanomaterials under the same‐poled magnetic field for potential applications in magnetic fluids, spintronics, and other related industries.     

A methodology to achieve the set of operation modes of reconfigurable parallel manipulators

The demand for increasingly more versatile machinery has boosted the development of the so-called reconfigurable mechanisms. In this paper, the authors present a general methodology to assess the multioperational capacity of a 6-DOF parallel manipulator basing on the possible motion patterns having Lie group structure that the manipulator owns. This ability of having different operation modes enables the manipulator to adapt to diverse tasks. To show the potential of the methodology, this approach has been applied to the 6-DOF 3-CPCR which is capable of generating multiple motion patterns. In addition to carrying out the complete theoretical study in which all the different operation modes are obtained, and validating the procedure with GIM software designed for kinematic analysis and design of mechanisms, a demonstration prototype of the 3-CPCR parallel manipulator has been also built.

     

Subtle Effect of Alkyl Substituted π-Bridges on Dibenzo[a,c]phenazine Based Polymer Donors towards Enhanced Photovoltaic Performance

Chinese Journal of Polymer Science - Selection of the strategically substituted alkyl chains has a significant effect to modulate the physical properties of conjugated polymers, electro-optical...